Scosche MAGICMOUNT MAGDM Anleitung

Register your product online at
LOW-PROFILE DASH MOUNT
FOR MOBILE DEVICES
PARTS INCLUDED
READ INSTRUCTIONS COMPLETELY BEFORE INSTALLING THIS MOUNT KIT.
WARNING: Do not use the magnetic mount with any hard-drive based devices such as: iPod
(1) Low-profile magnetic mount
classic, iPod video and Zune MP3 players. Use caution whenever removing or handling plastic
(1) Small metal plate
(1) Large metal plate parts of any vehicle. Unnecessary force or pressure can cause pieces to crack or break. Please use
a plastic card to remove the metal plates. Remove adhesive residue with a non-abrasive cleaner.
(1) Cleaning wipe
1
MOUNTING THE METAL PLATE
note: This item is not to be used with any Qi
Wireless Charging products as the metal plates can
cause extreme heat that can cause burns and/or
damage the device.
DEVICE
OPTION 1 (small or large plate):
Attach adhesive side of metal plate
directly to back of device.
DEVICE
OPTION 3
ADHESIVE SIDE
(large plate only):
Attach adhesive side of
metal plate to interior
of case, between
device and inside
of case. Plate will
adhere to magnetic
mount through rear
panel of case.
note: If choosing not to attach the metal plate
to the device or case, please leave the adhesive
backing in place. Position the plate between the
device and interior of case with the metal surface
facing the case.
©2014 SCOSCHE INDUSTRIES, INC.
www.scosche.com/register
MOUNT
MAGIC
OPTION 2
(small or large plate):
Attach adhesive
side of metal
plate directly
to back of case.
CASE
ADHESIVE SIDE
OPTION 4 (small plate only):
Similar to Option 3, attach the
adhesive side of the small
plate to the interior of the
device's rear battery compartment cover (if
space and design permit). Plate will adhere to
magnetic mount through the rear battery cover.
For more information please visit www.scosche.
com/magmount.
SI 300MAGDM/MAGDMI/MAGDM2 (ENGLISH) 10/14
2
PLACE LOW-PROFILE MOUNT
CAUTION: This magnetic mount is not a toy. The small
magnets are harmful if swallowed. Keep away from children.
MAGDM/
MAGDMI/
MAGDM2
INCLUDES
INTEGRATED
CABLE
MANAGEMENT
HOOK
3
ATTACH DEVICE TO
MAGNETIC MOUNT
CASE
Scosche Industries Inc. warrants this product to be free from defects in material and workmanship for a period of 1 year from purchase. This Scosche
product is sold with the understanding that the purchaser has independently determined the suitability of this product. This warranty is offered to
the original purchaser of the product only. This warranty does not cover the product if physically damaged, subject to negligence or misuse, abuse,
alteration, accident, or an act of GOD. This warranty does not apply to product which has water or physically damaged by accident or which has been
misused, disassembled or altered.
The original dated sales slip or proof of purchase will establish warranty eligibility. If the product should prove defective within the warranty period,
return the product with proof of purchase to Scosche Industries Inc. Scosche, at its option, will replace or repair the product free of charge and return
the product postage paid.
In no event shall Scosche Industries, Inc. be responsible for claims beyond the replacement value of the defective product, or in any way be liable or
responsible for consequential or incidental damages. No empress warranties and no implied warranties, whether for fitness or any particular use or
otherwise, except as set forth above (which is made expressly in lieu of all other warranties) shall apply to products sold by Scosche. Scosche Industries
cannot be held responsible for discrepancies/inconsistencies that may occur due to automotive manufacturing changes or option.
This document details the terms and conditions of the warranty provided with this product. Please disregard any other representations contained on
this product's packaging or provided with this product which constitute or appear to constitute a warranty.
This warranty is offered by Scosche Industries, 1550 Pacific Ave, Oxnard, CA 93033 United States. We can be called on 1 (805) 486 4450 or emailed
at sales@scosche.com
Subject to the exclusions and limitations set out below, we warrant to you that if you purchase a product directly from us, or from any of our authorized
resellers, that it will not contain defects which are a result of faulty manufacturer workmanship or materials. This warranty subsists for 1 year from the
date of purchase.
Subject to any rights you have under the Australian Consumer Law, we will not be liable for defects which are a result of damage or loss caused by
factors beyond our control, any product which has not been maintained according to any care or maintenance instructions provided with the product,
any alterations to a product which are not performed by us, or damage or defects caused to the product due to unusual or non-recommended use. We
will not be liable for any special, indirect, consequential or economic loss or damage or loss of profits whatsoever suffered by you or any other person
resulting from any act or omission by us.
Our total liability in respect of this Warranty against Defects is limited to the replacement of the goods.
Any claim made under this warranty must be made by contacting Scosche Industries. Scosche will then put you in touch with the closest company to
you that will cover warranties. All Returns of defective product will be sent at your expense, to be exchanged for a replacement.
This Warranty against Defects is provided in addition to other rights and remedies that you may have at law. Our goods come with guarantees that
cannot be excluded under the Australian Consumer Law. You are entitled to a replacement or refund for a major failure and for compensation for any
reasonably foreseeable loss or damage. You are also entitled to have the goods repaired or replaced if the goods fail to be of acceptable quality and
the failure does not amount to major failure.
DASH MOUNT (Rotates 90° for place-
ment on horizontal surfaces)
MAGNETIC
MOUNT
BALL-jOINT ANGLE
ADjUSTMENT (Rotate ball-joint
clockwise to loosen and adjust mount)
REMOVING ADHESIVE MOUNTING PARTS
(DASH MOUNT & METAL PLATE)
Use a thin plastic card to
carefully lift the magnetic
mount or metal plate
from the mounting
surface. Slowly lift up
and remove the mount
or metal plate.
LIMITED WARRANTY
For All Australian Sales
FLEx TABS (for curved surfaces)
NOTE: Carefully pre-bend the tabs
1-2 times before applying to the
curved surface.
PEEL OFF PROTECTIVE
BACKING AND ATTACH
THE MOUNT TO THE
DESIRED SURFACE
NOTE: Clean the
surface thoroughly
using the included
cleaning wipe. For
best adhesion, firmly
hold the mount against
the desired surface for up to one minute.