Switching The Device On; Setting Functions - SHE SHE7KL2001F Bedienungsanleitung

You can set all functions directly on the device or using the remote control.
Depending on the set function both the indicators on the operating panel display and
the symbols on the remote control display illuminate.

SWITCHING THE DEVICE ON

1. Connect the device to a grounded outlet.
2. When you switch the device on for the first time a start signal is emitted and the
device immediately switches to its standby mode.
3.
Press the POWER button to switch the device on. The POWER indicator lights up.
Never switch the air conditioning unit off by pulling the plug. Always use the on/off button to
switch the device off and wait a few minutes before disconnecting it from mains. This allows
SETTING MODES
Cooling mode
Ideal for cooling the room in hot and humid weather.

Push the MODE-Button until „COOL" indicator light lights up.

With the  and  buttons you can set the desired temperature (16-31C°)

With the "SPEED"-Button you can set the desired blower level. You can choose
beween:
o HIGH  High blower level
o LOW  Low blower level

Once you set the desired fan level the respective indicator light lights up.
In the summer we recommend setting a room temperature between 24 and 27 degrees
Celsius. Generally it is not recommended to set a temperature far below the outside
Dehumidification mode
Perfectly suited to reducing the humidity in the room (e.g. in the spring and autumn, in humid
rooms, during rainy periods etc.).

Push the MODE-Button until the "DEHUM" indicator light lights up.

The device now starts to dehumidify the air and sets the temperature to the current
room temperature minus 2C°

SETTING FUNCTIONS

the device to perform a cycle of functional checks.
temperature.
Seite 27 von 39
NOTE
NOTE