Accessing The Basic Settings; Care And Cleaning; Hob; Hob Frame - Blaupunkt 5IE6.3.0 Gebrauchs- Und Montageanleitung

Accessing the basic settings

The hob must be switched off.
Switch on the hob.
1.
Within the next 10 seconds, touch and hold the
2.
for 4 seconds.
™ and ‚ flash alternately in the displays and
preset.

Care and cleaning

The advice and warnings contained in this section aim to guide
you in cleaning and maintaining the hob, so that it is kept in the
best possible condition

Hob

Cleaning
Clean the hob after each use. This prevents food remains left
on the surface from burning. Wait until the hob is cool enough
before attempting to clean it.
Only use cleaning products specifically designed for hobs.
Follow the instructions provided on the packaging.
Do not use:
Undiluted washing-up liquid
■
Dishwasher detergent
■
Abrasive products
■

Fixing malfunctions

Malfunctions are usually due to small details. Before calling the
Technical Assistance Service you should bear in mind the
following advice and warnings.
Indicator
none
The indicators flash
The indicator - flashes on
the hotplate indicators
* If the warning persists call the Technical Assistance Service.
Do not rest hot pans on the control panel.
E
‹ appears as a
Malfunction
The electric power supply has been cut
off.
The appliance has not been correctly
connected following the connection dia-
gram.
Electronic system malfunction.
The control panel is damp or an object
is resting on it.
A fault has occurred in the electronic
system.
Press the
E
3.
appears in the heat setting display.
Then select the required setting using the + or - symbol.
4.
symbol
Touch the E
5.
The settings have been saved.
Quit
To leave the basic settings, turn off the hob at the main switch.
Corrosive products such as oven sprays or stain removers
■
Sponges that may scratch
■
High-pressure or steam cleaners
■
The best way to remove stubborn stains is to use a glass
scraper. Follow the manufacturer's instructions.
Suitable glass scrapers can be obtained through the Technical
Assistance Service or from our online shop.

Hob frame

In order to avoid damage to the hob frame, follow the
indications below:
Use only slightly soapy hot water
■
Do not use sharp or abrasive products
■
Do not use a glass scraper
■
Solution
Use other electrical appliances to check whether there has
been a power cut.
Check that the appliance has been connected correctly
according to the connection diagram.
If none of the above checks resolve the malfunction, contact
the Technical Assistance Service.
Dry the control panel area or remove the object.
Briefly cover the control panel with your hand to confirm the
malfunction.
symbol repeatedly until the required function
symbol again for at least 4 seconds.
47