Water Hardness Setting - AEG KS7415001M Gebrauchsanweisung

11
Basic Settings

Water Hardness setting

The appliance features a system that automatically indicates when it is time to descale.
The system can be optimised for households with very soft water (also through using a
water softening appliance) and very hard water, by changing the user settings to the
relevant range of water hardness (see table below).
To set the water hardness parameter, proceed as follows:
• To set the the water hardness please press the Confirmation key
key
necessary if your Steam oven is first plugged in or after a power failure).
• Press the ''+'' and ''-'' keys
according to the below table.
• Confirm the selection with the confirmation key
• A test strip is included inside the oven to measure the water hardness. Diep briefly (1
second) the test strip in water and shake off excess water. After 1 minute compare
with the gauge scale printed in the test strip packaging.
Type
Soft water
Medium water
Hard water
Downloaded from www.Manualslib.com
1
1 2
6 for 1 second. The hardness number will start to flash on the Descale display (not
4
English deg.
[°eH]
< 8,75
8,75 to 26,25
> 26,25
manuals search engine
3 4
, to set the correct water hardness parameter value,
. (The Descale display switches off).
1
Water hardness
French deg.
[°dF]
< 12,6
12,6 to 25,2
> 25,2
5 6
1 and the Cancel
German deg. Display
[°dH]
< 7 1
7 to 21 2
> 21 3