Inhaltsverzeichnis
Werbung
RA 742 T
CONTROL AND THEIR FUNCTIONS
1.
Tuning Knob
2.
Function Knob
3.
Volume Knob
4.
Battery compartment
5.
LED indicator
6.
Speaker
7.
Aux In jack
8.
Telescopic Antenna
BATTERY POWER OPERATION
Install 4 x "AA" batteries into the battery compartment (4)
on the backside of the device, carefully as indicated in the
battery compartment.
Remove the batteries when don't use the device for a long time.
OPERATION
1.
To turn on the device put the Function Knob (2) into FM
position.
The LED indicator (5) will turn on.
2.
Tune in the station you want to listen with the Tuning Knob
(1).
3.
Adjust the volume using Volume Knob(3).
4.
To turn off the device put the Function Knob (2) into OFF
position.
The LED indicator (5) will turn off.
RECEPTION NOTE
For FM reception pull out the Telescopic Antenna (1) adjust
the direction, lenght and angle to give the best reception.
AUX IN
Connect one end of the cable Aux In (not supplied) to the Aux
In Jack (7), and the other end to the external device.
Turn on the unit and start playback from the external device.
Note:
Once you have finished using unplug the Aux In cable, when
the cable is connected the radio function is excluded.
CARE AND MAINTENANCE
This device is a high precision electronic instrument; so it's
recommended to not place the radio set near sources of heat,
in humid or dusty places, nor expose it directly to the sunlight.
Do not block the ventilation slits and leave a space of at least
5 cm to allow ventilation.
Clean the radio with a damp cloth. Using detergents, abrasives
or solvents may damage the radio set.
TECHNICAL SPECIFICATION
Power supply:
Frequency Range:
TREVI pursues a policy of continuous research and deve-
lopment. Therefore the characteristics of the product can differ
from those in the description.
English
6V
- 4x"AA"batteries
not included
FM 87.5-108.0 MHz
Werbung
Inhaltsverzeichnis
