Werbung
Verfügbare Sprachen
Verfügbare Sprachen
Buttons and Installation
EN
1
2
3
4
5
6
7
8
9
10
11
14
Front:
Left Mouse Button
1
Right Mouse Button
2
Mouse Wheel
3
Fire Button
4
Dpi + Switch
5
Dpi – Switch
6
Side:
Thumb Keyboard
7
Bottom:
Profile Switch
8
Weight System
9
Teflon Mouse Glides
10
Laser Sensor
11
Profile & Mouse Configuration
Profile 1
Profile 2
DPI
1.000
2.000
DPI Stage
1/5
2/5
Configuring your mouse
(without the software):
When using the mouse without the software
you can choose between five profiles and the
corresponding colors by using the profile switch
on the bottom of the mouse. Please check the
table above for reference. The chosen profile
can always be checked by the color of the LED.
Each profile also has a standard DPI setting that
can be changed by using the DPI + / - switches
on the top of the mouse. In each profile you can
freely choose any of the five standard DPI set-
tings (1000 / 2000 / 4000 / 8200 / 16400 DPI).
Lioncast Tip:
When configuring your mouse with the soft-
ware, you can save all the settings into the
mouse itself and use them on every computer
just by plugging it in. No installation of the soft-
ware is needed for this, only the plug and play
drivers from Windows will be installed.
Profile 3
Profile 4
Profile 5
4.000
8.200
16.400
3/5
4/5
Installing the Lioncast
LM30 Software:
1.
Plug the Lioncast LM20 Mouse into the
USB port on your computer.
2.
Install the software either from the
included CD or by downloading the
installer from
www.lioncast.de/downloads.
3.
Run the installer and follow the
instructions on the screen.
Note: On some Windows versions there is a
warning prompt. Please ignore it and continue
with the installation.
EN
5/5
15
Werbung
