Approved Uhp And Run Flat Tyre Demounting And Mounting Procedure; Tyre Inflation; Safety Instructions; Risk Of Explosion - Mondolfo Ferro Aquila Tornado Betriebsanleitung

- manually adjust the tyre so that the upper
shoulder of the rim passes the lower bead and
goes into the well (Fig. 28d);
- keep the section of the tyre with the lower bead
not yet inserted in the rim partially depressed
and press the
until the fi rst bead is completely inserted;
- operate the
tool to the rest position;
- return the lower bead breaker disc to position using the specifi c knob (see Fig. 28a).
5.6. APPROVED UHP and RUN FLAT TYRE DEMOUNTING AND
MOUNTING PROCEDURE
For this type of tyre please refer to the instructions in the manual prepared by WDK
(German Tyre Industry Association).

5.7. TYRE INFLATION

5.7.a. Safety instructions
160
pedal to start rotation
lever to move the mounting

RISK OF EXPLOSION

Never exceed the pressure recommended by the
tyre manufacturer. Never mount tyres on rims with
a different diameter
An exploding tyre can cause personal injury or
death.
DANGER
User manual Aquila Tornado
28d