care and maintenance
Your Leica Ultravid binoculars need no spe
cial maintenance. Use a soft lens brush or a
blower to remove large particles of dirt, sand,
etc. To remove fingerprints etc., first wipe the
eyepiece and lens with a damp cloth, then dry
them with a piece of clean, soft chamois
leather or lintfree cloth. If the binoculars,
particularly the rotating eyecups, are very
dirty, simply rinse them under a running fau c
et. Always rinse off salt water.
Moisture inside the central focusing unit
(visible through the scale window) will dry
quickest when the two rings (3/4) are
unlocked. Alcohol and other chemical solu
tions must not be used.
attention!
Do not apply too much pressure when wiping
strongly soiled lens surfaces. Even though the
coating is very tough, sand and salt crystals
can cause scratches.
accessories
Tripod adapter with
Floating carrying strap, orange ............. 42163
repLacements
Should you need replacements for your binoc
ulars, such as eyecups, covers, or a strap,
please turn to our Customer Care department
or your national Leica agent. The addresses
are listed in the Warranty Card.
20
Order No.
" thread ............ 42220
1 / 4