Removing The Grease Filters - Atag WS6011MR Anleitung

MAINTENANCE

Removing the grease filters

using hot water and a suitable detergent, or in a dishwasher at 65 °C
(if the dishwasher is used, select the full cycle function and leave
dishes out).
Eliminate excess water without damaging the filter, then remove the
mattress located inside the plastic frame and put it in the oven for
10 minutes at 100 °C to dry completely. Replace the mattress every
3 years and when the cloth is damaged. You can rinse out the mattress
max. five times.
Switch off the electricity! Remove the plug from the socket or switch off
the electricity at the mains.
The hood has two different grease filters:
• Open the catch to release the grease filter of the CMV and then tilt
the grease filter down toward you. Do this with the other grease
filter as well (WS9011MR).
• Pull the panel that holds the grease filter(s) downwards.
• Push in the stud to release the recirculation grease filter, and tilt the
grease filter down toward you.
GB 13