Operation - ALASKA CP1000 Gebrauchsanweisung

BEFORE FIRST USE
• Check delivery contents for any missing items and any possible transport damage. In the event of damage in
transit or missing parts, contact your dealer (
• Place the appliance on a horizontal, stable and heat resistant surface.
Leave at least 15 cm of space around and above the appliance.
• Let the appliance heat up for
residues from the manufacturing process. Odours and smoke may be emitted. However, these are harmless
and will only last a short time. Ensure adequate ventilation.
• Let the appliance cool completely. Clean it before using it for baking crepes (
• Note: You will need a heat-resistant plastic or wooden spatula (not included) to turn the crepes. Have a
spatula at hand before starting to cook crepes, because you have to work quickly while baking to avoid
burning the dough.

OPERATION

• Connect the power plug
• Switching the appliance on: Set the on/off switch
The baking plate (1)
For_Real_Ala_37-001784_CP1000_DE_GB_V07_140609.indb 7
Notes:
• The appliance is equipped with non-skid rubber feet (4). Furniture and
working tops may be coated with various synthetic substances (e.g. paint)
that could react adversely with the rubber feet and soften them.
If necessary, place an anti-slip mat under the appliance.
4 minutes at the highest temperature setting (
Note:
• Never attempt to cut the crepes on the baking plate (1).
The baking plate is covered with a layer of non-stick coating. Do not use pointed
or hard utensils, such as metal spatulas, to remove dough from the plate or to turn
the crepes. This would damage the non-sticking surface. Instead, use only heat-
resistant plastic or wooden spatulas.
• Prior to each use clean the appliance with a moistened cloth.
(2) to a suitable wall outlet.
begins to heat up.
Guarantee).
15 cm
I/O (5) to I position. The red indicator light
7
15 cm
Operation) to remove all
Cleaning and care).
(8) lights up.
9/6/14 3:43 PM