Resetting The Appliance; Lengthy Downtimes Of Appliance; Instructions And Warnings For Use - Angelo Po 0N0FT1E Benutzerhandbuch

Important
Contact the after-sales service If the safety
thermostat is tripped.
If the appliance is to be out of use for a lengthy
period, proceed as follows.
Cut off the mains electricity supply using the
1)
appliance's master switch.
Clean the appliance and the surrounding areas
2)
thoroughly.
To ensure correct use of the appliance, the fol-
lowing rules should be adopted.
Important
Use only the accessories recommended by the
manufacturer.
Important
Do not use sharp or pointed tools for clean-
ing and / or processing of food directly on the
plate.
– Never use the appliance for frying in large
amounts of oil.
– Never use the appliance to heat pans as this
will damage the surface of the cooking plate.
– Never use the appliance for cooking frozen
foods, since the temperature diff erence might
damage the surface of the cooking plate (for
chromium-plated and compound plates only).
3269811_ut_GB

RESETTING THE APPLIANCE

LENGTHY DOWNTIMES OF APPLIANCE

INSTRUCTIONS AND WARNINGS FOR USE

Spread a fi lm of edible oil over the stainless
3)
steel surfaces.
Carry out all the servicing procedures.
4)
Cover the appliance and leave a few gaps to al-
5)
low air to circulate.
– Take care not to scratch or chip the surface of
the plate, to ensure maintenance of its cha-
racteristics and hygienic cooking.
– Use only metal tools for moving or removing
foods on the cooking plate (for chromium-
plated and compound plates only).
– Always keep the appliance and the surroun-
ding areas clean.
– When cleaning, use only food-approved deter-
gents.
– Frequently check the level of the fat into the
drip tray and empty it when it has reached the
maximum level.
- 11 -
GB
ENGLISH