Connecting The Appliance - hanseatic HGS18560A2NFW Gebrauchsanleitung

Page EN-20 Start-up

Connecting the appliance

NOTICE
Risk of damage!
If the appliance has been transported
horizontally, lubricant from the com-
pressor may make its way into the cool-
ing circuit.
Do not tip the appliance to a horizon-
■
tal position; transport it at a maxi-
mum incline of 45°.
Allow the appliance to stand upright
■
for approx. 2 hours after transport
and before connecting. This allows
the lubricant enough time to fl ow
back into the compressor.
• Insert the mains plug into an easily acces-
sible socket (220–240 V~ / 50 Hz).
You will find all important information
about operation from see EN-10.