Door Reversibility - Electrolux LTB1AF28U0 Benutzerinformation

3.6 Door reversibility

WARNING!
Before carrying out any
operations, remove the plug
from the power socket.
Empty the appliance.
1. Make sure the appliance stands
upright.
2. Open both doors and remove the
door equipment. Refer to "Daily Use"
chapter. Close the doors.
3. Use a thin-blade screwdriver to
remove the screw hole cover (A) and
the upper hinge cover (B). Put them
aside.
A
4. Unscrew the screws of the right
upper hinge. Support the upper door
with your hand. Remove the upper
hinge, reverse it, screw the screws
and the pin to it. Put the hinge aside.
1
5. Carefully lift the upper door from the
middle hinge to remove it. Place the
upper door on the soft surface. Be
careful not to lose washers that may
stick to the door.
B
2
3
6. Unscrew the screw (B) and the "stop
block" (A) and screw them on the
opposite side of the door.
A
B
7. Unscrew the screws from the middle
hinge. Remove the middle hinge and
put it aside together with the screws.
Be careful not to lose washers that may
stick to the door.
8. Place the lower door on the soft
surface.
9. Unscrew the screw (B) and the "stop
block" (A) and screw them on the
opposite side of the door.
A
B
10. Remove the hole covers of the
middle hinge and put them in the
holes on the opposite side.
ENGLISH 9
1
3
2
1
3
2