Installing Your New Appliance - Hisense Combi RB343D4BW1 A+ Betriebsanweisung

Installing your new appliance

Before using the appliance for the first
time, you should review the following tips.
Ventilation of appliance
In order to improve
efficiency of the cooling system and
save energy, it is necessary to maintain
good ventilation around the appliance. For
this reason, sufficient clear space should
be available around the refrigerator.
It is advisable for there to be 50-70mm of
space from the back to the wall, at least
100mm from its top,at last 100mm from its
side to the wall and a clear space in front
to allow the doors to open 135°. Please
see the following diagrams.
● Note:
This appliance performs well within the
climate class from N toSTshowed in the
table below.
It may not work properly if left at a
temperature above or below the indicated
range for a long period.
Climate class
SN
N
ST
T
Stand your appliance in a dry place to
●
avoid moisture damage.
Keep the appliance out of direct sunlight,
●
rain or frost. Stand the appliance away
from heat sources such as stoves, fires or
heaters.
100 100
。
130
938
Ambient temperature
+10°C to +32°C
+16°C to +32°C
+16°C to +38°C
+16°C to +43°C
Leveling of appliance
● For sufficient leveling and air circulating in
the lower rear section of the appliance,
the bottom feet may need to be adjusted.
● You can adjust them manually using a
suitable spanner.
To allow the doors to self-close, tilt the top
backwards by about 10mm.
8
≤10mm