Safety Instructions; General Safety Rules; Work Area Safety; Electrical Safety - Hilti C 4/36-90 Bedienungsanleitung

Type:
Generation: 01
Serial no.:
en

2 Safety instructions

2.1 General safety rules

WARNING! Read all instructions! Failure to follow all instructions listed
below may result in electric shock, fire and/or serious injury. SAVE THESE
INSTRUCTIONS!

2.1.1 Work area safety

a) Ensure that the workplace is well lit.
b) Modification of the machine or tampering with its parts is not
permissible.
c) The appliance is not intended for wall mounting.
d) Keep work area clean and well lit. Cluttered and dark areas invite
accidents.
e) Do not operate the appliance in explosive atmospheres, such as
in the presence of flammable liquids, gases or dust. Chargers can
cause sparks which may ignite dust or fumes.
Keep children and other persons away from the area while the
f)
charger is in use.
g) Always secure the C4/36­DC charger to prevent it sliding about in
the vehicle.

2.1.2 Electrical safety

a) The plug on the supply cord of the power tool or appliance must
match the outlet. Never modify the plug in any way. Unmodified
plugs and matching outlets reduce risk of electric shock.
b) Avoid body contact with earthed or grounded surfaces such as
pipes, radiators, ranges and refrigerators. There is an increased risk
of electric shock if your body is earthed or grounded.
c) Do not abuse the supply cord. Never use the supply cord to carry,
pull or unplug the appliance. Keep the cord away from heat, oil,
sharp edges or moving parts. Damaged or entangled cords increase
the risk of electric shock.
d) Use the charger only in a dry environment. Water entering an electric
appliance increases the risk of electric shock.
16
Printed: 06.07.2015 | Doc-Nr: PUB / 5069440 / 000 / 08
Downloaded from www.Manualslib.com manuals search engine