Safety Instructions; Electrical Connection - AEG HE634400XB Benutzerinformation

4 www.aeg.com
•
•
•
•
•
•

2. SAFETY INSTRUCTIONS

2.1 Installation
• Remove all the packaging.
• Do not install or use a damaged
• Obey the installation instruction
• Keep the minimum distance from the
• Always be careful when you move the
• Seal the cut surfaces with a sealant to
• Protect the bottom of the appliance
• Do not install the appliance adjacent
• If the appliance is installed above
• The bottom of the appliance can get
Downloaded from www.Manualslib.com
Do not store items on the cooking surfaces.
Metallic objects such as knives, forks, spoons and lids
should not be placed on the hob surface since they
can get hot.
Do not use a steam cleaner to clean the appliance.
After use, switch off the hob element by its control
and do not rely on the pan detector.
If the glass ceramic surface / glass surface is cracked,
switch off the appliance to avoid the possibility of
electric shock.
If the supply cord is damaged, it must be replaced by
the manufacturer, an authorized Service or similarly
qualified persons in order to avoid a hazard.
WARNING!
Only a qualified person must
install this appliance.
appliance.
supplied with the appliance.
other appliances and units.
appliance because it is heavy. Always
wear safety gloves.
prevent moisture to cause swelling.
from steam and moisture.
to a door or under a window. This
prevents hot cookware to fall from the
appliance when the door or the
window is opened.
drawers make sure that the space,
between the bottom of the appliance
and the upper drawer, is sufficient for
air circulation.
hot. Make sure to install a non-
combustile separation panel under
manuals search engine
the appliance to prevent access to the
bottom.
• Make sure that the ventilation space
of 2 mm, between the worktop and
the front of the below unit, is free.
The warranty does not cover damages
caused by the lack of an adequate
ventilation space.

2.2 Electrical Connection

WARNING!
Risk of fire and electrical
shock.
• All electrical connections should be
made by a qualified electrician.
• The appliance must be earthed.
• Before connecting the hob to an oven
and before every wiring make sure the
main terminals of both appliances are
not live.
• Make sure that the electrical
information on the rating plate agrees
with the power supply. If not, contact
an electrician.
• Make sure the appliance is installed
correctly. Loose and incorrect
electricity mains cable or plug (if
applicable) can make the terminal
become too hot.
• Use the correct electricity mains
cable.