W223_Analog2_NA_EN.qxd
CHRONOGRAPH
•
The Chronograph is capable of measuring:
•
Minutes elapsed up to 1 hour (12 o'clock eye)
•
Hour elapsed up to 12 hours (9 o'clock eye)
•
Seconds elapsed up to 1 minute (seconds sweep
hand)
BEFORE USING THE CHRONOGRAPH:
Adjust all the chronograph hands to the "0" or 12 hr.
position.
TO ADJUST THE CHRONOGRAPH HANDS:
1) PULL out CROWN to "C" position
2) PRESS pusher "A" intermittently until the seconds
sweep hand resets to "0" or 12-hr. position
3) PRESS pusher "B" intermittently until the hands in
the 12 o'clock eye reset to "0" or 12-hr position
4) PUSH in Crown to "A" position
NOTE: Make sure that the chronograph is stopped
and reset before adjusting.
Downloaded from
www.Manualslib.com
6/5/09
ENGLISH
24
manuals search engine
9:19 AM
Page 24
NOTE: PRESSING and HOLDING either pusher "A" or
"B" will cause the hands to move continually until the
pusher is released.
STANDARD CHRONOGRAPH
MEASUREMENT:
1) PRESS pusher "A" to start timing
2) PRESS pusher "A" to stop timing
3) PRESS pusher "B" to reset
ENGLISH
25