Light Replacement - AEG DD9996-B Gebrauchsanleitung

EN
This filter cannot be washed or regenerated. It must be replaced when the C appears on the display
or at least once every 4 months. The filter saturation alarm has to be activated already before.
Activation of the alarm signal
• In the recycling version hoods the filter saturation alarm must be activated during the instal-lation
or later.
• Switch off the hood and the lights.
• Press the E-key for about 5 seconds until an animation appears on the display
• Within 5 seconds press the D-key to activate/deactivate charcoal filter saturation alarm.
C-symbol lit - charcoal filter saturation alarm ACTIVATED.
•
• C-symbol unlit - charcoal filter saturation alarm DEACTIVATED.
REPLACING THE CHARCOAL fILTER
Alarm reset
• Press the G-key for at least 2 seconds.
Replacing the filter
• If close, open the upper panel (see Part USE).
• Remove the metal filters.
• Remove the saturated charcoal filter as indica-
ted (A).
• Fit the new filters as indicated (B).
• Put the metal grease filters in their seats.
20 W halogen light.
• Extract the lamp from the lamp holder by
pulling gently.
• Replace with another of the same type,
making sure that the two pins are properly
inserted in the lamp holder socket holes.
Downloaded from www.Manualslib.com
Charcoal filter (recycling version)
Lighting

LIGHT REPLACEMENT

manuals search engine
B
A
11