Inhaltsverzeichnis
Werbung
2D to 3D video converter box
First installation:
1. Connect the converter box power cable to the converter box and plug in.
2. You will see a single continuous blue light on the front of the converter box.
3. Disconnect the HDMI cable from the video source device (HD Cable Box, HD Satellite Box, Blu-ray
or media player or game console and connect it to the output on the converter box (leave the other
end connected to the TV). You will see a second continuous blue light on the front of the converter
box.
4. Using a second HDMI cable, connect one of the HDMI inputs from the converter box to the original
video source device.
5. Switch on the TV.
6. Set the TV to display the relevant HDMI input (the same as you used before for the video source).
You should see a green screen on the TV, indicating the converter box is connected to your TV.
7. If necessary, switch on the video source device.
8. You will see the image from the video source device on the TV.
9. High Speed HDMI® with ethernet compliant 3D sources will be recognized and the converter box
will automatically switch to 3D mode. You can switch through available modes by pressing the
mode button on the front panel or the 2D/3D button on the remote control.
10. Otherwise, to change the 3D settings press the mode button on the front of the converter box or the
2D/3D button on the remote control. The 3D converter box supports FP, SBS and TAB formats
which can be accessed through the Mode Menu.
11. Put on your coloured 3D glasses to experience the 3D effect.
Set-top box
HDMI OUT
DVD or Blu-ray player
HDMI OUT
ENGLISH
TV, monitor or projector
2D/3D converter box
HDMI OUT
2
TV
HDMI
IN
HDMI IN
Werbung
Inhaltsverzeichnis
