Drivers; How To Configure With Aminstal; Assigning Interrupt Channels - Siemens SIMATIC NET CP 1411 Installationsanleitung

Installation Instructions CP 1411

3.4.2 Drivers

Drivers The installation of the individual drivers under the various operating
systems is described in the installation instructions on the diskette.

3.4.3 How to Configure with AMINSTAL

Procedure The AMINSTAL program is easy to handle:

3.4.4 Assigning Interrupt Channels

The CP 1411 can be set to the following interrupt channels (IRQ) on
Interrupt Channels
your PC/programming device:
Procedure This setting is made when you configure the module with AMINSTAL.
Make sure that the selected interrupt channel on your
PC/programming device is not used by any other module.
40
All manuals and user guides at all-guides.com
Step
1 Switch on your computer.
2 Start the AMINSTAL program.
Possible Interrupt 3
Numbers (IRQ)
Procedure
4 5 9 10 11
Installationsanleitung CP 1411
C79000-Z8974-C24-05
12 15