Hub Gear System (Enviolo); Frame; Handlebars, Handlebar Stem - Cube CARGO HYBRID 2020 Originalbetriebsanleitung

22 | CARGO HYBRID

4.4.2 Hub gear system (Enviolo)

The hub gear system allows you to continuously
adjust the ratio of the chain to the cycling conditions
and thus enjoy optimum cycling comfort.
The continuously variable hub gear system works
with NuVinci® technology. Using the so-called pla-
netary gear in the rear wheel hub, you change the
transmission ratio of the chain (shift continuously).
High transmission (= high gear):
High effort when pedalling, low cadence.
Low transmission (= low gear):
Low effort when pedalling, high cadence.
For the number of gears of your hub gear system,
please refer to the indication on the hub body or
on the shift lever.
4.5

Frame

In the frame construction of your Cargo
Hybrid, we have already integrated a
frame lock for future development.
This frame lock serves only to insert the bicycle
belt when converting from chain to belt drive.
Since, due to the design, no Cargo Hybrid model
can/may be converted from chain to belt drive,
there is currently no need to open or change the
frame lock.
Never open/use/change the frame lock.
Î
Contact your bicycle dealer for information
Î
if/when a conversion from chain to belt drive
is possible for your Cargo Hybrid.
4.6

Handlebars, handlebar stem

WARNING!
Dangers if the components are
not replaced properly!
Due to its design, the steering
assembly of your Cargo Hybrid is
usually more complex than that of
a regular bike (without box).
The handlebars and handlebar stem
of your Cargo Hybrid must meet
special requirements and must not
be replaced without further ado.
If, for example, you intend to com-
bine a longer handlebar stem with
wider handlebars, this circumstance
could lead to a blockage or complete
loss of function of the steering and/
or brakes!
Always keep in mind, however: The
Î
handlebars and/or handlebar stem may
only be replaced with suitable ISO-
certified components by a specialist
bicycle dealer.
The handlebars and handlebar stem components
are optimally adapted to the special operating
characteristics of your Cargo Hybrid. With the
additionally installed Speedlifter, you can quickly
and comfortably adjust the handlebar height
(see chapter 7.2 „Adjusting the handlebar height").
Bild:
Handlebars with handlebar stem (including
Speedlifter)