Connecting The Camera - Honeywell HCM574L Bedienungsanleitung

Connecting the Camera

1. Connect the VIDEO connector on the rear of the
camera to the video-in connector on your monitor.
2. Connect the camera to a power supply appropriate for
your installation.
HCM574L, HCM384L, HCM584LX, HCM404LX:
12 VDC or 24 VAC power supply
HCM585LX, HCM405LX: 230V power supply
3. Plug in the power supply. The power (PWR) LED
illuminates to show that the camera is receiving power.
If it does not illuminate, check the connections and the
power source.
Figure 7
Low Voltage
(HCM574L, HCM384L,
HCM584LX, HCM404LX)
CLASS 2 ONLY
IRIS
V-PH
LEVEL
PWR
Rev 2
Camera Connections
VIDEO
VSD
AES AI
OFF BLC
OFF AGC
INT LL
DC
Power LED
10
Mains 230V—Line Voltage
(HCM585LX, HCM405LX)
Connect to Monitor
IRIS
LEVEL
AI
AES
BLC
OFF
VSD
OFF AGC
INT LL
DC
VIDEO
V -PH
PWR
G-113078-002
02/07