Simons Voss Technologies PinCode-Tastatur Kurzanleitung Seite 32

4. Configuration
NOTE
Enter the numbers consecutively. The PIN code keypad only signals the
pressing of the keys, but not completion of the individual steps in the
process.
1. Enter 000 0 (SI firmware from 31.14.16.12: Press the first 0 approx. 2s
2. Enter the default or old Master PIN (default: 123 456 78).
3. Enter the new Master PIN.
4. Enter the new Master PIN again.
9
9
IMPORTANT
Master PIN loss
The Master PIN is an essential, integral part of the security concept. No
more administrative changes can be made to the device if the Master
PIN is lost.
1. Keep the Master PIN in a safe place.
2. Make the Master PIN visible for authorized persons at any time.
32 / 156
→ flashes 2x orange).
PIN code keypad beeps and flashes green briefly twice.
9
The new Master PIN must consist of 8 digits and must not start
9
with 0.
PIN code keypad beeps and flashes green briefly twice.
The Master PIN has been successfully changed.
PinCode-Tastatur (online)
EN