Panasonic TX-32A400E Bedienungsanleitung Seite 5

Attaching / removing the base
Warning
Do not disassemble or modify the base.
● Otherwise the TV may fall over and become damaged, and personal injury may result.
Caution
Do not use any base other than the one provided with this TV.
● Otherwise the TV may fall over and become damaged, and personal injury may result.
Do not use the base if it becomes warped or physically damaged.
● If you use the base while it is physically damaged, personal injury may result. Contact your local Panasonic dealer
immediately.
During set-up, make sure that all screws are securely tightened.
● If insufficient care is taken to ensure screws are properly tightened during assembly, the base will not be strong
enough to support the TV, and it might fall over and become damaged, and personal injury may result.
Ensure that the TV does not fall over.
● If the TV is knocked or children climb onto the base with the TV installed, the TV may fall over and personal injury
may result.
Two or more people are required to install and remove the TV.
● If two or more people are not present, the TV may be dropped, and personal injury may result.
When removing the base from the TV, do not remove the base by the methods other than the specified
procedure. (see below)
● Otherwise the TV and / or base may fall over and become damaged, and personal injury may result.
Assembly screws for base (4)
M4 × 16 mm
1
Place the TV screen face-down on a cushioned, clean
surface to protect the screen from damages and
scratches.
3
Use the assembly screws for base to fasten the base
securely to the TV.
Base
2
Insert the base hook into the bottom hole of the TV.
● Please remove the mylar of base before installing.
4
Please be sure to fasten assembly screws with screw
driver.
5