Mode Selection; Daily Cleaning - Mellerware Mmmm! Gebrauchsanweisung

not operating. It may damage the
grinder.
The dots on the adjuster knob
–
indicate the fineness of the grind.

MODE SELECTION

The device has three different
–
settings: default setting, ECO mode
and speed mode. In ECO mode,
the appliance helps to save more
energy. In speed mode, the user
can make their coffee faster than in
default setting.
Below you will see a table with the
–
active functions of each Mode:
ECO Speed
mode mode
Illumina-
No
tion light
Pre-
Yes
brewing*
Auto shut
10min 30min
off time
Cup
Yes
volumen
memory
*Note: What is Pre-brewing? The
pre-brewing function moistens the
grounded beans in the brewer with
a small amount of water before full
extraction. This expands the coffee
grounds to build up a greater
pressure in the brewer which help
extraction of all the oils and full
flavor from the grounded beans.
Hot
water
button
(H)
Strong
coffee
button (I)
Mild
espresso
Default
button
mode
(J)
Yes Yes
–
No Yes
20min
Yes Yes
–
–
–
To select the desired mode:
When the machine is in standby
condition, press and hold the ON/
OFF Button (G) for 5 seconds,
and it will start to flash. The next
buttons will give you the following
indications:
ECO Speed
mode mode
Lights Flas-
hing
ON
Flas- Flas-
hing hing
Flas- Flas-
hing hing
To change the mode, press the hot
water button (H) for ECO mode,
strong espresso button (I) for speed
mode and mild espresso button
(J) for default setting. Two "beeps"
indicates that the mode is being
selected.
If you want to keep the settings
without any change, press ON/
OFF button again or wait for 5
seconds and the device will return
to standby mode.
Cleanign and
Maintenance

DAILY CLEANING

Cleaning and maintenance of the
appliance are very important to
prolong its useful life.
Remove the external drip tray (1).
EN ES
Default
mode
Flas-
hing
Flas-
hing
Lights
ON