CASATELLI Leonardo 12T Allgemeine Angaben-Hinweise-Installation-Wartung Seite 35

5.5.1
in compliance with the UNI 10683 - EN 1856-1-2 -
EN 1857 - EN 1443 - EN 13384-1-3 - EN 12391-1
standards both regarding the dimensions and the
materials used in its construction.
porous inner surfaces) are illegal and prevent the
stove from working correctly.
The discharge of fumes through a traditional
chimney is maintained;
If the chimney has a bigger section, it must be
"intubated" with a suitably insulated steel pipe (with
diameter in line with the route) (Fig. 5.9).
Make sure that the connection to the brickwork
chimney is properly sealed.
If the pipes pass through roofs or wooden walls,
commercially available.
Product images are purely indicative
004778340 - 16/07/2020
A) Windproof cowl
B) Seal
C) Inspect
1) Vermiculite and/or mineral wool.
2) Steel pipes.
3) Closing panel.
Fig. 5.8
Fig. 5.9
35