Inhaltsverzeichnis
Werbung
Verfügbare Sprachen
Verfügbare Sprachen
1.14
USE AND MAINTENANCE
It is advisable to turn on the hood shortly before starting to cook and leave it on for approx. 15 minutes after or at least until
the smell is completely removed.
Disconnect electrical current during maintenance.
The maintenance of external parts is a simple cleaning
of the surfaces with a damp sponge, water and neutral soap.
Do not use detergents, abrasive powders or brushes.
Do not clean in any case the inside of the hood with damp sponges or water. This could cause
shortcircuiting.
STANDARD MAINTENANCE
Standard maintenance is carried out:
PERIODICALLY on grease traps and on activated carbon filters;
OCCASIONALY on halogen spotlights for illumination.
1.15
MAINTENANCE OF METALLIC FILTERS
It must be washed in hot water and detergent every 10-15 days of use.
MAINTENANCE OF ACTIVATED CARBON FILTERS (OPTIONAL)
They wear out according to the operating conditions to which they are
subjected.
They cannot be washed.
Replacement is recommended at least every SIX MONTHS .
Follow the replacing instructions listed below:
- Disassemble the metal anti-grease filters.
- Rotate the filter for approx. 90º and remove it
- For assembly, slide the new filter in the nib on the side of the motor and then rotate it for approx. 90degrees.
10
Werbung
Inhaltsverzeichnis
