2 Amplifiers - One Speaker (dual 2 ohm voice coils)
One dual 2 ohm voice coil woofer with each voice coil connected to an individual
amplifier, resulting in a 2 ohm load to each amplifier.
1. Connect one of the speaker's voice coils to the first amplifier by connecting
the positive (+) terminal and the negative (-) terminal from the speaker to the
respective positive (+) terminal and the negative (-) terminal from the first
amplifier.
2. Connect the other of the speaker's voice coils to the second amplifier by
connecting the positive (+) terminal and negative (-) terminal from the speaker
to the respective positive (+) terminal and the negative (-) terminal from second
amplifier.
12
Downloaded from
www.Manualslib.com
Figure 11
Figura 11
Abbildung 11
manuals search engine
+
-
© 2010 directed electronics—all rights reserved
-
-
+
+
+
-