Picture Controls - 3D Colour Management, Base Colour Adjustment, Cinema Mode, Antenna Amplifier - Toshiba REGZA WLG66 Serie Bedienungsanleitung

3D Colour management
When 3D Colour management is selected it allows the
'Base colour adjustment' feature to become available.
In the PICTURE menu press Q to select 3D Colour
1
management.
Picture settings
3D Colour management
Base colour adjustment
Cinema mode
MENU Back
Press S or R to select On or Off.
2
Base colour adjustment
The Base colour adjustment feature allows the
adjustment of individual colours to suit personal
preference. This can be useful when using an
In the PICTURE menu press Q to select
1
Base colour adjustment, then press OK.
Picture settings
3D Colour management
Base colour adjustment
Cinema mode
MENU Back
Press P and Q to select an option, then R to
2
adjust the settings.
Downloaded from www.Manualslib.com
Picture controls
PICTURE
OK
On
OK
On
EXIT Watch TV
external source.
PICTURE
OK
On
OK
On
EXIT Watch TV
manuals search engine
continued
Red
Green
Blue
Yellow
Magenta
Cyan
Reset
Back
MENU
To return to the original factory settings select
Reset and press OK.
Cinema mode
If there are lines or jagged edges in the film or programme
being viewed, selecting Cinema mode can help correct
this by smoothing out the picture.
In the PICTURE menu press Q to select Cinema
1
mode.
Press S or R to select On or Off.
2
Antenna amplifier
If the signal being received by the television is too strong,
this may result in picture interference and/or a buzzing
sound. Setting Antenna Amplifier to Off reduces the
signal strength, and can help to remove the interference.
In the SET UP menu press Q until Antenna
1
Amplifier is highlighted.
With S or R select either On or Off.
2
Language
Country
Auto tuning
Manual tuning
Antenna Amplifier
AV connection
Back
MENU
22
Base colour adjustment
Hue Saturation Brightness
+2 +6 +4
0 0 0
0 0 0
0 0 0
0 0 0
0 0 0
OK
Watch TV
EXIT
SET UP
English
UK
OK
OK
On
OK
Watch TV
EXIT
1/2