Zanussi ZWF 1225 Benutzerinformation Seite 13

The appliance starts the countdown. The in-
dicator
When the countdown is completed, the pro-
gramme starts automatically.
You can change or cancel the delay start
before you press the Start button. After
pressing the Start button you can only cancel
the delay.
To cancel the delay start:
1. Press the Start button
ance to PAUSE.
2. Press the Delay button
shows
3. Press the Start button
programme immediately.
Interrupting a programme and changing
the options
You can change only some options before they
operate.
1. Press
2. Change the options.
3. Press
Cancelling a programme
1. Turn the programme knob to
the programme and to deactivate the appli-
ance.
2. Turn the programme knob again to activate
the appliance. Now, you can set a new
washing programme.
The appliance does not drain the water.
Changing the options
You can change only some options before they
operate.
1. Press the button
2. Change the options.
3. Press the button
continues.
Opening the door
While a programme or the delay start operates,
the appliance door is locked and the display
shows the indicator
www.zanussi.com
Downloaded from www.Manualslib.com
goes on.
to set the appli-
. The display
'.
again to start the
. The indicator flashes.
again. The programme continues.
to cancel
. The indicator flashes.
again. The programme
.
manuals search engine
Caution! If the temperature and level of
the water in the drum are too high, you
cannot open the door.
Open the appliance door when the delay
start operates:
1. Press to pause the appliance.
2. Wait until the door lock indicator
off.
3. You can open the door.
4. Close the door and press
delay start continues to operate.
Open the appliance door when the
programme operates:
1. Turn the programme knob to
vate the appliance.
2. Wait for some minutes and then open the
appliance door.
3. Close the appliance door.
4. Set the programme again.
At the end of the programme
• The appliance stops automatically.
• The acoustic signals operate.
• In the display
comes on.
• The indicator of the Start/Pause button
goes off.
• The door lock indicator
1. Turn the programme knob to
2. Remove the laundry from the appliance.
Make sure that the drum is empty.
3. Keep the door ajar, to prevent the mildew
and odours.
4. Close the water tap.
The washing programme is completed,
but there is water in the drum:
– The drum turns regularly to prevent the crea-
ses in the laundry.
– The door lock indicator
stays locked.
– You must drain the water to open the door.
To drain the water:
1. Set the Drain or the Spin programme.
goes
again. The
to deacti-
goes off.
.
is on. The door
13