5.5.2 Detaching the charging adapter from the power adapter
5.6 Device holder
5.6.1 Mounting the device holder with tape
1
2
5.6.2 Mounting the device holder in the benchtop rack
HandyStep® touch, HandyStep® touch S 997486
a.
Press the push button and remove the charging
adapter.
1
Universal holder
a.
Clean the mounting surface with a suitable cleaner (no
moisturizing household cleaners) and a lint-free cloth,
and allow it to dry thoroughly.
b.
Remove the protective film from the adhesive strips.
c.
Using your thumb, firmly press the mounting support
onto the cleaned surface. Wait 72 h before first use.
d.
Slide the universal holder onto the mounting support.
a.
Insert the holder into the benchtop rack without tape
until it clicks audibly into place.
5 Functions and controls
2
Mounting support with
adhesive strips
Operating manual
69