Switching The Clipper On And Off; Using The Clipper; Replacing The Clipping Blades - Heiniger Xperience 2-Speed Betriebsanleitung

6.3

Switching the clipper on and off

Fig. 4
6.4

Using the clipper

Approach the animal from the front.
X X
Secure the animal to be clipped and calm it down.
X X
Plug the power plug into the socket.
X X
Switch the clipper on while you are in the visual range of the animal.
X X
Select the desired speed (level I or II).
X X
Observe the animal's behaviour while clipping.
X X
Switch the clipper off after you have finished clipping and pull the plug
X X
from the socket.
6.5

Replacing the clipping blades

Fig. 5
Fig. 6
12
0
I
II
Instruction Manual / Xperience 2-Speed cattle clipper
To switch the clipper on, slide the
X X
ON/OFF switch to the position I or II.
To switch the clipper off, slide the
X X
ON/OFF switch to the position 0 (see
Fig. 4).
Switch the clipper off by sliding the
X X
switch to the position 0.
Pull the plug from the socket.
X X
Turn the adjusting knob in the direc-
X X
tion of the arrow until the resistance
decreases.
Place the clipper with the comb plate
X X
screws facing upwards on a flat sur-
face.
Loosen the comb plate screws and
X X
remove the clipping blades.