Yard Force SA600H Originalanleitung Seite 18

UNDERSTANDING THE ROBOTIC MOWER
3.2.4. YARD FORCE Robotic Mower Mowing Limitations
The YARD FORCE robotic lawnmower is programmed by manufacturer to cut 24 hours, 7
days a week but as every garden will be different and if you want to change these settings,
it is easy to program this by yourself see instructions which listed at follow chapter.
If your neighbor is using a YARD FORCE Robotic Lawnmower also, you need keep a 0.5 m
distance between your and neighbor's boundary wires to eliminate interference. And you
need keep your charging station more than 10m from your neighbor's boundary wires, and
you have to set a different boundary signal from neighbor's as signal S1 or S2. Ref. 5.5.3
"Signal setting".
Own land
Below is a table showing the signal distances for each of the Robot Mowers, please note
your model and use this information as your guide when designing the boundary layout.
Model
SA600H
NOTE !
When the working area is less than 100 m
please connect a 10Ω/20W cement resistance to the boundary wire, or contact the service.
S1
> 0,5 m
> 10 m
Max field
600 m
When the working area is less
than 100 m
wire less than 40m, please
connect a 10 Ω / 20 W cement
resistance to the boundary wire
> 10 m
Neighbour
S2
Distance of receive the signal
2
2
or total boundary wire less than 40 m,
2
or total boundary
＜100 m
2
16
L
12.5 m