Channel Menu; Manual Store; Auto Store - Samsung 6 Serie Handbuch

Basic Features
Retuning channels
¦
Antenna (Air / Cable)
Before your television can begin memorizing the available
channels, you must specify the type of signal source that is
connected to the TV (i.e. an Air or a Cable system).
Country
The PIN input screen appears. Enter your 4 digit PIN number.
Digital Channel
■
channels.
Analogue Channel
■
channels.

Auto Store

Scans for a channel automatically and stores in the TV.
✎
Automatically allocated programme numbers may not
correspond to actual or desired programme numbers. If
a channel is locked using the Child Lock function, the
PIN input window appears.
Antenna Source (Air / Cable)
■
source to memorise.
Channel Source (Digital & Analogue / Digital /
■
Analogue): Select the channel source to memorise.
When selecting Cable → Digital & Analogue or Digital:
Provide a value to scan for cable channels.
Search Mode (Full / Network / Quick): Scans for all
channels with active broadcast stations and stores them
in the TV.
✎
If you set
Network ID, Frequency, Modulation, Symbol
Rate manually by press the button on the remote
control.
Network (Auto / Manual): Selects the Network ID
setting mode among Auto or Manual.
Network ID: When Network is Manual, you can set up
Network ID using the numeric buttons.
Frequency: Displays the frequency for the channel.
(differs in each country)
Modulation: Displays available modulation values.
Symbol Rate: Displays available symbol rates.
12
English
Downloaded from www.Manualslib.com

Channel Menu

t
: Change the country for digital
: Change the country for analogue
: Select the antenna
Quick, you can set up Network,
manuals search engine

Manual Store

Scans for a channel manually and stores in the TV.
✎
If a channel is locked using the
the PIN input window appears.
Digital Channel :
■
When scanning has finished, channels are updated in
the channel list.
✎
Antenna → Air: Channel,Frequency,
When selecting
Bandwidth
✎
Antenna → Cable: Frequency,
When selecting
Modulation, Symbol Rate
Analogue Channel (Programme, Colour System,
■
Sound System, Channel, Search): If there is abnormal
sound or no sound, reselect the sound standard
required.
✎
Channel mode
x
P (programme mode): When tuning is complete,
the broadcasting stations in your area have been
assigned to position numbers from P0 to P99. You
can select a channel by entering the position number
in this mode.
x
(aerial channel mode) / S (cable channel mode):
C
These two modes allow you to select a channel
by entering the assigned number for each aerial
broadcasting station or cable channel.
Editing channels
¦
Channel Manager Option Menu
(in Channel Manager)
1. Select a channel and press the
2. Edit the channel name or number using the Edit
Channel Name or Edit Channel Number menu.
Edit Channel Name (analogue channels only): Assign
■
your own channel name.
Edit Channel Number (digital channels only): Edit the
■
number by pressing the number buttons desired.
Other Features
¦
Cable Search Option
(depending on the country)
Sets additional search options such as the frequency and
symbol rate for a cable network search.
Freq.Start / Freq.Stop : Set the start or stop frequency
■
(differs in each country)
Modulation : Displays available modulation values.
■
: Displays available symbol rates.
Symbol Rate
■
Child Lock function,
TOOLS button.