Positioning; General Recommendations - Dynaudio DM Serie Bedienungsanleitung

B
Fig. 3 Positioning the loudspeakers.
Dynaudio DM
Downloaded from www.Manualslib.com

Positioning

Note: To maintain the quality of the DM loudspeakers for the long term, placing such in
The DM range consists of classic bass reflex loudspeaker designs with no unusual or
extraordinary positioning demands. Every room will still have its own particular sound
characteristics. Any room is also shaped and decorated uniquely, and therefore remains
independent regarding options for positioning loudspeakers. The following steps are
general suggestions that will make the correct positioning easier to achieve.

General recommendations

Following explanations refer to Fig. 3:
A
• The distance between each loudspeaker and your listening position should be the
• The distance between the loudspeakers should be the same or better slightly less
• The closer the listening position is in relation to the loudspeakers, the closer the
B
• As a starting point, it is recommended that the speakers be about 2 meters apart from
• If the speakers are positioned too close to each other, the stereo image will not seem
A ≤ B
• Paying attention to the image during listening tests will help dictate optimum
manuals search engine
very warm, very cold, very humid environments and the exposure to direct
sunlight should be avoided.
same (B). Try to achieve an isosceles triangle.
than the distance between each loudspeakers and your listening position (A, B).
speakers can be positioned to each other.
each other for the best results (A).
realistic; if that distance is too wide, the image may leave an acoustic hole in the
middle.
placement during experimentation and set-up.
Positioning
5