Af Function; Activating/Deactivating The Af Function - Pioneer KEH-P5010R Handbuch

AF Function

The AF (Alternative Frequencies search) function is used to search for other frequencies in
the same network as the currently tuned station. It automatically retunes the receiver to
another frequency in the network which is broadcasting a stronger signal when there are
problems with reception of the currently tuned station or better reception is possible on
a different frequency.
Note:
• AF tunes the receiver only to RDS stations when you use Seek tuning or BSM Auto Memory with
the "AF " indicator ON.
• When you recall a preset station, the tuner may update the preset station with a new frequency from
the station's AF list. (This is only available when using presets on the FM1 band.) No preset num-
ber appears on the display if the RDS data for the station received differs from that for the original-
ly stored station.
• Sound may be temporarily interrupted by another program during an AF frequency search.
• When the tuner is tuned to a non-RDS station, the "AF " indicator flashes.
• AF can be switched ON or OFF independently for each FM band.

Activating/Deactivating the AF Function

AF is set to ON by default.
• Turn AF to OFF.
Hold for 2 seconds
To turn AF back ON, repeat the preceding operation.
Downloaded from www.Manualslib.com manuals search engine
"AF " disappears
12