Conducting A Final Test - FujiFilm WP-FXA500 Bedienungsanleitung

Positioning the Digital Camera in the Waterproof Case

Conducting a final test

Carry out a final submersion test on the waterproof case after mounting the
digital camera. To check for water leaks, watch for any water leaking in while
immersing it in a water tank or a bathtub filled with water. Check it in a way
that lets you take it out of water immediately (to save the camera inside) if you
need to.
1
Immerse it in water for 30 seconds.
2
After slowly lifting the waterproof case out of water, closely check
for the following:
Water droplets
Dip it slowly in
water.
Joint
• If you see a continuous flow of
air bubbles from the joint of the
waterproof case while in the water,
this indicates a leak.
• When all is well, operate the
buttons and take some test shots
while it is under water.
• Water droplets near the joint of the
waterproof case.
• Water pooled inside the waterproof
case.
EN-10