Air Conditioner Installation - Technibel Serie C5 Bedienungsanleitung

AIR CONDITIONER INSTALLATION

The air conditioner is made of two units interconnected by a
flexible tube. The indoor unit must be placed in the room to be
air conditioned, near a window, a balcony-door or a perimeter
wall. The outdoor unit, that provides to the disposal of heat
and condensation, must be located outside, on a window sill,
on a balcony or hanged to the wall.
POSITIONING OF OUTDOOR UNIT
The outdoor unit must always be kept in vertical position and
levelled. Make sure that there are no obstacles around the
unit affecting the free circulation of air. A lug at the rear bottom
of the unit ensures the minimum distance from the wall (3 cm).
The unit must be kept at a minimum distance of cm. 15
(sidewise) and cm. 80 (frontally) from any walls.
INSTALLATION TYPE A
If your room has a balcony or a window-sill of sufficient depth
(min. 25 cm) you may rest the unit freely onto it. For
sake, you may anchor the unit to the window-sill using one
M6 x 20 expansion bolt in the slot of the lug at the rear bottom
of the unit.
The flexible tube may easily pass through the balcony door
or window shutters set ajar.
INSTALLATION TYPE B (USING THE BASKET)
1. Fix the basket to the wall below the window sill.
2. Place the unit in the basket and check that it is levelled.
INSTALLATION TYPE C (USING THE SUPPORT)
1. Fix the support guide to the wall below the window sill.
2. Insert the support in the handle of outdoor unit, and turn the
outdoor unit upside down as shown in the picture.
3. Place the support and secure it at the edge of the unit, using
the screws.
4. Insert the support, fixed on the unit, at the guide fixed to
the wall. Make sure it is levelled.
2 holes ø 10
safety's
2 holes ø 10
support
guide
5
M6 x 20
M6 x 20
Min. 25 cm.
TYPE A
BASKET
200
TYPE B
SUPPORT
TYPE C
EG