Control Panel - JUNO JCU158F0S1 Benutzerinformation

8
min.
5 cm
200 cm
CAUTION! Refer to the
installation instructions for the
installation.

CONTROL PANEL

1. Temperature indicator LED
2. FastFreeze indicator
3. FastFreeze button
4. Temperature regulator
ON/OFF button
Switching on
1. Insert the plug into the wall socket.
2. Touch the temperature regulator
button if all LED indicators are off.
Switching off
Keep touching the temperature regulator
button for 3 seconds.
All indicators light off.
2
min.
2
200 cm
1 1 2 2
4 4 3 3
Door reversibility
Please refer to the separate document
with instructions on installation and door
reversal.
CAUTION! At every stage of
reversing the door protect the
floor from scratching with a
durable material.
Temperature regulation
To operate the appliance, touch the
temperature regulator until the LED
corresponding to the required temperature
lights up. Selection is progressive, varying
from 2°C to 8°C. Recommended setting is
4°C.
1. Touch temperature regulator.
Current temperature indicator blinks. Any
time you touch the temperature regulator,
the setting moves by one position. The
corresponding LED blinks for a while.
2. Touch the temperature regulator until
the required temperature is selected.
The set temperature will be
reached within 24 hours. After
a power failure the set
temperature remains stored.
FastFreeze function
The FastFreeze function is used to
perform pre-freezing and fast freezing in
sequence in the freezer compartment.
This function accelerates the freezing of
fresh food and, at the same time, protects
food products already stored in the freezer
compartment from undesirable warming.