RIGOL DS1000Z Serie Gebrauchsanleitungen Seite 254

Kapitel 17 Technische Daten
Data Bits
I2C Trigger
Trigger Condition
Address Bits
Address Range
Byte Length
SPI Trigger
Trigger Condition
Timeout Value
Data Bits
Data Line Setting
Measure
Cursor
Auto Measurement
Number of
Measurements
Measurement
Range
Measurement
Statistic
Counter
Math
Serie DS1000Z / DS1000Z-E Benutzerhandbuch
5 bits, 6 bits, 7 bits, 8 bits
Start, Restart, Stop, Missing Ack, Address, Data, A&D
7 bits, 8 bits, 10 bits
0x0 to 0x7F, 0x0 to 0xFF, 0x0 to 0x3FF
1 to 5
TimeOut, CS
16 ns to 10 s
4 bit to 32 bit
H, L, X
Voltage deviation between cursors (△V)
Manual
Reciprocal of △T (Hz) (1/△T)
Time deviation between cursors (△T)
mode
Track mode Voltage and time values of the waveform
point
Auto mode Allow to display cursors during auto
measurement
Measurements of Maximum, Minimum, Peak-Peak Value,
Top Value, Bottom Value, Amplitude, Average, Mean Square
Root, Overshoot, Pre-shoot, Area, Period Area, Frequency,
Period, Rise Time, Fall Time, Positive Pulse Width, Negative
Pulse Width, Positive Duty Cycle, Negative Duty Cycle,
Delay AB , Delay AB , Phase AB , Phase AB
Display 5 measurements at the same time
Screen Region
Average, Max, Min, Standard Deviation, Number of
Measurements
Hardware 6 bits counter (channels are selectable)
Kapitel 17-V RIGOL
Kapitel 17-V