FITFIU FITNESS MC-600 Betriebsanleitung Seite 58

78
26
STEP 6:
Use the 5# Allen wrench, the screw M8*20 (75) and lock
washer (81) to lock the Massager fixing frame (96) through base
on left upright (3) and right upright tube (4).
71
96
2
STEP 8:
Put the foams (77) on the Massager supporting frame (97).
After the installation of this treadmill it is possible to see the two connecting lines of the two ends of the running
surface, which guarantees its stability. And it is carried out by means of a meticulous heat-sealing process during its
manufacture. It is the longest lasting way to join the tape itself and ensure the life of the product.
3
4
103
61
97
81
75
58
STEP 5:
bolt ST4.2*19 (78) to the right base cover
through right upright tube. Lleft side same
as right side.
27
78
81 75
STEP 7:
Use the 5# Allen wrench and wrench with screw
driver, bolt M8*20 (75) and lock washer (81)to fix the
massager support frame (97) on base (2). Use 5# Allen
wrench and wrench with screw dreiver to fix massager
support frame (97) together with massager fixing frame
by bolt M8*40 (71). Then,use lock nut M8 (61), lock washer
(103) to fix the end of massager supporting frame (97) onto
the massager fixing frame (96).
77
Use wrench w/screw driver,
96
4
97
81
75
3
77