Installation; Control Panel - Klarstein Chillout 10035319 Bedienungsanleitung

INSTALLATION

1. During transportation, do not tilt the machine more than 45 degrees. Do not reverse
the machine. This may damage the compressor and the sealing system.
2. Remove all packing materials, check the machine carefully and make sure that the
machine, power cord and plug are normal.
3. The machine should be on a level surface. To ensure sufficient ventilation, the
distance of the back of ice maker to the wall should be at least 150 mm, it should
be away from the oven, radiator or other heat source.
4. Before using the machine for the first time, place the machine and leave the
transparent cover open for at least two hours.
5. Make sure that the home voltage is consistent with the voltage indicated by the
machine.
6. Distilled water is not allowed. Mineral water is recommended.

CONTROL PANEL

ICE FULL: Ice full alarm
ADD WATER: Water shortage alarm
ICE MAKING: Ice making
POWER button
EN
17