Operation Procedure; Maintenance - Bo Jungle B-Sensy Humi Purifier Gebrauchsanleitung

Night mode：
display will be dim in 20 seconds). Press any key to stop the night mode, and display recover.
Timer： Press this key to start timer setting function with setting time circle of 1-10 hours, machine will stop working
automatically when setting timer reached.
Humidistat： Press this key to set the desirable humidity; Machine will stop working once humidity reached setting
humidity. Humidity can be adjusted from 40%～80%RH. When machine start working, it will keep humidifying for 2
minutes no matter the room humidity reaches the setting humidity or not.
AUTO mode： Press this button, the machine enter an automatic control mode. This model maintains the relative
humidity at 55%~68%. Machine will choose the best humidifying method according to different room ambient
humidity.
Mist Level： Steam volume can be changed amount 1 estate, 2 estates, and 3 estate by pressing this key . Smallest
steam for 1 estate, biggest steam for 3 estates

OPERATION PROCEDURE

1. Get the water tank out of the machine, unscrew the lid and fill the tank with water, then screw the lid well. Put the water
tank on the machine bodysteadily.
2. Inspect whether the mist outlet nozzle and handle cover are assembled well on the water tank.
3. Plug in the power, and then press the on/off switch, the machine starts to work.
4. Follow below steps to use aroma function:
o Take out aroma box
o Use water-soluble aroma oil to drop into the sponge
o Put the aroma box back into the machine, the aroma function will be on automatically when turn on the machine
o To stop the aroma function or when the machine is not in use for a long time, take out the sponge in the aroma
box and clear it, put it back to the machine.
Warning: before replacing the filter, turn the power off and unplug the device.

MAINTENANCE

Always make sure the device is unplugged before cleaning it.
1. Transducer
The water quality in someplace is too hard so that the transducer surface will be easy to scale formation, The users
•
need to clean transducer with cleaning agent .
add little cleaning agent on the transducer surface ( More or less depends on the scale ), then infuse water into the sink
•
to soak the sink fully for 10-15 min.
• Clean with brush until scale disappear.
• Clean twice with water
• Dont clean transducer by any metal or stiffness material or scrape it to avoid any damage
2. Water tank inside
Clean water tank inside and water sink twice per week at least when use machine frequently
Use soft cloth wipe it when water tank side has scale
There will be some dirt stick to the tank inside wall, which can be cleaned with soft scour, Clear the scour completely
Don't put acid, alkalescency, blencher scour into water tank to avoid damage
3. Water sink inside
Take out the water in sink, Clean the scale by brush, then wiped by damp cloth
Flush it by water
4. Air filter
6
Press this button the machine start night mode, all display will be dim (the sleeping mode icon in the