Levenhuk DTX RC1 Bedienungsanleitung Seite 13

View photos and videos
1. Insert the microSD card into the SD slot.
2. Press the "Video" button twice to turn on the viewing mode.
3. Press the "Right" and "Left" buttons to view the pictures and videos. Press the
"Capture" button to start playing the video.
Use with a computer and TV
View on a computer (RC1, RC3 only)
AMCAP, ViewPlayCap, WebCam Monitor, and Microscope Measure programs can be
download from the official Levenhuk website.
Levenhuk DTX RC1
Windows 7/8/10, Mac OS:
1. Install the AMCAP (Windows 7/8), ViewPlayCap (Windows 10) and WebCam
Monitor (Mac OS) software on the computer. The PC camera icon will appear on
your desktop after the installation of the software is complete.
2. Use the "Power on/off" button to turn off the LCD screen.
3. Use the USB cable for connecting the LCD screen to the computer.
Click the PC camera icon on your computer's desktop to start viewing.
4.
Levenhuk DTX RC3
Windows XP SP3/7/8/10:
1. Install the Microscope Measure software on the computer. The Microscope
Measure icon will appear on your desktop after the installation of the software is
complete.
2. Use the "Power on/off" button to turn off the LCD screen.
3. Use the USB cable for connecting the LCD screen to the computer.
4. Click the Microscope Measure icon on your computer's desktop to start viewing.
Connecting to a TV/monitor with an AV connector (RC3 only)
1. Connect the microscope to the mains.
2. Use an AV cable (not included) for connecting the LCD screen to the TV/monitor. The
image on the LCD screen turns off and the display on the connected screen starts.
3. Now, you can start viewing on the screen. If a microSD card is inserted into
the microscope, you can take and save photos. Video recording function is not
available in this display mode.
Connecting to a TV/monitor with an HDMI connector (RC3, RC4 only)
1. Connect the microscope to the mains.
2. Use an HDMI cable (included) for connecting the LCD screen to the TV/monitor. The
image on the LCD screen turns off and the display on the connected screen starts.
3. Now, you can start viewing on the screen. If a microSD card is inserted into
the microscope, you can take and save photos. Video recording function is not
available in this display mode.
Setup
Press the "Menu" button to go to the settings menu of the LCD screen Use the control
buttons to select the required parameters. Press the "Menu" button again to save the
selected parameters. Do not turn off the power of the microscope while saving the
settings.
13