Hameg HM8130 Handbuch Seite 25

O p e r a t i o n o f t h e H M 8 1 3 0
The contents of this matrix correspond to one signal period.
The y-axis is for the amplitude values and the x-axis represents
is for the phase values. The possible amplitude values extend
from –2048 to +2047, and the phase values from 0 to 1023. A
signal between –2048 and +2047 generates an amplitude of
±10 V at the output of the HM8130 (without load) if the amplitude
is set to 20 V .
pp
The HM8130 can save up to 8 different arbitrary signals.
Selcting the arbitrary function by operating the FUNCTION
button (ARB – LED lights) the display shows the current
arbitrary memory number for a short time (e.g. P-0) For
selecting the desired arbitrary signal the button has push
as often as the requested memory is displayed.
Figure 10 : Arbitrary signal
25
Subject to change without notice