Worx Professional WU152 Bedienungsanleitung Seite 12

Plug replacement
(UK & Ireland only)
If you need to replace the fitted plug then follow the instructions
below.
IMPORTANT
The wires in the mains lead are colored in accordance with the
following code:
BLUE =NEUTRAL
As the colors of the wires in the mains lead of this appliance may not
correspond with the colored markings identifying the terminals in
your plug, proceed as follows. The wire which is colored blue must
be connected to the terminal which is marked with N. The wire which
is colored brown must be connected to the terminal which is marked
with L.
Note: If a moulded plug is fitted and has to be removed take great care
in disposing of the plug and severed cable, it must be destroyed to
prevent engaging into a socket.
13 Amp fuse approved
to BS1362
Connect
Blue to N
Brown L (live)
(neutral)
Outer sleeve
Cable grip
firmly clamped
All manuals and user guides at all-guides.com
BROWN =LIVE
WARNING!
Never connect live
or neutral wires to
the earth terminal
of the plug. Only
fit an approved
13ABS1363/A
plug and the
correct rated fuse.
12