Kessel EasyClean free Auto Mix&Pump Einbau- Und Betriebsanleitung Seite 34

4.6 Establishing electrical connections
(a) Mains (400 V AC 50 Hz)
(b) Pump (400 V AC 50 Hz)
(c) Actuator (230 V AC 50 Hz max. 200 VA max. 1.2 A)
(d) Hot water solenoid valve (230 V AC, 50 Hz, closed when currentless)
(e) Cold water solenoid valve (230 V AC, 50 Hz, closed when currentless)
(f) Potential-free contact
(g) Bridge
(h) SonicControl sensor (optional)
(i) Connection for remote control (accessory)
Connecting the control unit
Select a suitable position for attachment of the control
unit.
Set up connections (pump, solenoid valves, actuator,
mains cable) in accordance with the connection diagram.
Carry out a functional test (see "Functional test",
page 38).
34 / 148 016-190_01