DreamLED CLL-510 Bedienungsanleitung

USER MANUAL CLL-510
CABLE LED LIGHT
NL FR
GB
© DREAM-LED - VERSION 1 - 06/2018
ENGLISH SAFETY INSTRUCTIONS
• Children should be supervised to ensure that they do not play with the
product. This product is not a toy.
• Check carefully that the product is in good condition when opening
the package.
• Never place the product near sources of excessive heat or cold.
Extreme temperatures have a negative impact on the life of electronics.
• Never touch the plug contacts with sharp or metal objects.
• Only use the original power supply and original accessories.
• Keep the product away from special liquids and vapors.
•
Do not immerse any part of the product in water.
• Switch off the product before cleaning it. Do not use solvents based
on solvents, only a soft, antistatic cloth and clean water.
• Do not switch the product on while it is still in the packaging.
• Unplug the appliance from the mains when it is not in use for a long
period of time or before cleaning the appliance. Always hold the
power cable by the plug and not by the cable.
• Do not undertake repair attempts yourself.
• The lamps cannot be replaced.
• If the product is not correctly installed or used, Dreamled
responsibility.
PACKAGE CONTENTS
• 1x Cable LED Light
• 1x adapter
•
1x connector cable
• 10x cable ties
DECLARATION OF CONFORMITY
Hereby, Par la présente,
Company / Entreprise: TE-Group NV
Address: / Adresse: Kapelsestraat 61, 2950 Kapellen, Belgium
declare that the following equipment:
déclare que le dispositif suivant:
Product name / Nom du produit: Dreamled CLL-510
D
Product type / Type de produit: Cable LED Light
conforms with the following safety requirements of the
directives 2014/30/EU,
EC/1907/2006. Conformity is guaranteed by the CE-symbol.
This product has been tested against following standards and
specifications, applying versions valid in June 2018. The full
text of the EU declaration of conformity is available at the
following internet address:
http://www.dream-led.be/DOC_CLL-510.
est conforme aux exigences de sécurité suivantes des
directives 2014/30/EU,
EC/1907/2006. La conformité est garantie par le symbole CE.
Ce produit a été testé par rapport aux normes et spécifications
suivantes, appliquant les versions valides en Juin 2018.
Le texte complet de la déclaration UE de conformité est
disponible à l'adresse internet
http://www.dream-led.be/DOC_CLL-510.
EN 55015: 2013 +A1: 2015
EN61000-3-2: 2014
EN 61000-3-3: 2013
EN 61547: 2009
EN 61000-4-2: 2009
EN 61000-4-3: 2006 +A1: 2008 +A2: 2010
EN 61000-4-4: 2012
EN 61000-4-5: 2014
EN 61000-4-6: 2014
EN 61000-4-11: 2004
EN 60598-2-20: 2010
IEC62321-3-1: 2013
S. Izaks, Product & Research Manager
Authorized Signature, Kapellen - June 2018
This waterproof light string is suitable for indoor and outdoor use. Cable
and adapter are both IP44 (splash / rain / moisture resistant).
1. Remove the Cable LED Light from the box and spread it out.
2.
Attach the light string to the desired location. Each lamp has its own
mounting plate for hanging and / or screwing. You can also use
the supplied cable ties. Note: Make sure that the light string is not
pinched or folded and protect it from damage.
3. Insert the adapter of the light string into the socket. When using out-
doors, you must connect it to a waterproof outlet that is suitable for
outdoor use. Note: Do not install the light string when it is raining or in
other unfavorable weather conditions.
The 5m light string can be expanded to 3 sets. Each package contains an
extra connector cable with which 2 Cable LED Lights can be connected to
each other. Note: The remaining adapters are not needed, please store
them for future use.
See illustration I & II
1. There is a connector at the end of each light string. Remove the water-
cannot accept
®
tight sealing cap and put the screw closure back. The connector of the 1
string should be connected to one end of the supplied connector cable.
Note: There is only 1 correct way to connect both parts!
2. Push the two parts firmly together and tighten the connections.
3. Connect the other end of the connector cable in the same way with
the connector of the 2
repeat this process.
Note: If you have too much remaining cable, you can tie it together
with one of the supplied cable ties.
2014/35/EU, 2011/65/EU &
2014/35/EU, 2011/65/EU &
INSTALLATION
st
light string. To connect a 3 light string,
nd rd
ILLUSTRATION
ILLUSTRATION I
500 cm
ILLUSTRATION II
1
2
3
OPERATION
1. Press the button on the adapter once to turn on the Cable LED Light.
2. Press the button again to activate the timer (TIMER mode, 6 hours):
The timer will be set to 6 hours automatically and then switch OFF.
The light will then stay OFF for 18 hours and start again automatically
for 6 hours the next day at the same time.
Note: The timer works for 24h a day, this means that the power for
the lighting should always be ON for the timer to work correctly. If
the power is interrupted / turned OFF by means of the button on the
adapter, the timer settings are lost and should be set again.
3.
Press the button on the adapter once more to switch off the light string
or remove the plug from the socket.
GUARANTEE
Copyright © DreamLED . DreamLED is a registered trademark of TE-
® ®
Group NV. The DreamLED brand stands for superior product quality
®
and outstanding customer service. That is why DreamLED
product against all defects in material and workmanship for a period of
two (2) years from the date of original purchase of the product. The terms
of this guarantee and the extent of responsibility of DreamLED under this
warranty can be downloaded from the website: www.dream-led.eu.
SUPPORT
For more information, technical questions and return requests
concerning this product, you should contact:
support@dream-led.eu
300 cm
® warrants this