Herunterladen Diese Seite drucken

TOOLCRAFT 40 53 98 Bedienungsanleitung

Werkzeugtrolley

Werbung

BEDIENUNGSANLEITUNG
WERKZEUGTROLLEY
Best.-Nr. 40 53 98
Bestimmungsgemäße Verwendung
Dieser Werkzeugtrolley ermöglicht eine geordnete und übersichtliche Aufbewahrung von Werkzeugen
und Zubehör und ist jederzeit einsatzbereit. Da das Produkt mit einem ausziehbarem Griff und zwei
Rollen ausgestattet ist, kann es bequem bewegt werden. Außerdem bietet der Werkzeugtrolley Platz für
Büromaterial, Dokumente und einen Laptop Computer.
Aus Sicherheits- und Zulassungsgründen dürfen Sie das Produkt nicht umbauen und/oder verändern.
Falls Sie das Produkt für andere Zwecke verwenden, als zuvor beschrieben, kann das Produkt beschädigt
werden. Lesen Sie sich die Bedienungsanleitung genau durch und bewahren Sie diese auf. Reichen Sie das
Produkt nur zusammen mit der Bedienungsanleitung an dritte Personen weiter.
Das Produkt entspricht den gesetzlichen, nationalen und europäischen Anforderungen. Alle enthaltenen
Firmennamen und Produktbezeichnungen sind Warenzeichen der jeweiligen Inhaber. Alle Rechte vorbehalten.
Lieferumfang
• Werkzeugtrolley
• Schulterriemen
• Bedienungsanleitung
Sicherheitshinweise
Lesen Sie sich die Bedienungsanleitung aufmerksam durch und beachten Sie
insbesondere die Sicherheitshinweise. Falls Sie die Sicherheitshinweise und die
Angaben zur sachgemäßen Handhabung in dieser Bedienungsanleitung nicht befolgen,
übernehmen wir für dadurch resultierende Personen-/Sachschäden keine Haftung.
Außerdem erlischt in solchen Fällen die Gewährleistung/Garantie.
a) Personen / Produkt
• Das Produkt ist kein Spielzeug. Halten Sie es von Kindern und Haustieren fern.
• Lassen Sie das Verpackungsmaterial nicht achtlos liegen. Dieses könnte für Kinder zu einem
gefährlichen Spielzeug werden.
• Schützen Sie das Produkt vor extremen Temperaturen, direktem Sonnenlicht, starken
Erschütterungen, hoher Feuchtigkeit, Nässe, brennbaren Gasen, Dämpfen und Lösungsmitteln.
• Setzen Sie das Produkt keiner mechanischen Beanspruchung aus.
• Beachten Sie immer die maximale Zuladekapazität. Überladen kann zu Beschädigungen des
Produktes, sowie zu Unfällen und Verletzungen führen.
• Gehen Sie vorsichtig mit dem Produkt um. Durch Stöße, Schläge oder dem Fall aus bereits
geringer Höhe kann es beschädigt werden.
b) Sonstiges
• Sollten Sie noch Fragen haben, die in dieser Bedienungsanleitung nicht beantwortet werden,
wenden Sie sich an unseren technischen Kundendienst oder an andere Fachleute.
Ausstattung
a) Außen
• Strapazierfähiges Polyamid
• Die Tasche kann von beiden Seiten geöffnet und um 180° aufgeklappt werden
• Ergonomischer Tragegriff und gepolsterter Schulterriemen
• Ausziehbarer Griff für bequemes Rollen
• Geräumige Fronttasche für Büromaterial
b) Innen
• Tasche für einen Laptop Computer im vorderen Bereich
• Einschubtasche für Dokumente und eine beidseitig bestückbare Werkzeugtafel aus Con Pearl im hinteren
Bereich
• 3 große vielseitig nutzbare Taschen im Inneren an der Rückwand
Wartung und Reinigung
• Entfernen Sie Staub mit einem trockenen Staubtuch.
• Verwenden Sie bei stärkerer Verschmutzung ein leicht angefeuchtetes Tuch. Trocknen Sie anschließend
alle Teile sorgfältig ab.
Entsorgung
Entsorgen Sie das Produkt am Ende seiner Lebensdauer gemäß den geltenden gesetzlichen
Bestimmungen.
Sie erfüllen damit die gesetzlichen Verpflichtungen und leisten Ihren Beitrag zum Umweltschutz.
Technische Daten
Gewebematerial ..................... Polyamid
Zuladekapazität ...................... max. 8 kg
Abmessungen (B x H x T) ...... ca. 450 x 380 x 170 mm
Gewicht ................................... ca. 3,8 kg
Diese Bedienungsanleitung ist eine Publikation der Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
Alle Rechte einschließlich Übersetzung vorbehalten. Reproduktionen jeder Art, z. B. Fotokopie, Mikroverfilmung, oder die Erfassung
in elektronischen Datenverarbeitungsanlagen, bedürfen der schriftlichen Genehmigung des Herausgebers. Nachdruck, auch
auszugsweise, verboten.
Diese Bedienungsanleitung entspricht dem technischen Stand bei Drucklegung. Änderungen in Technik und Ausstattung vorbehalten.
© Copyright 2013 by Conrad Electronic SE.
OPERATING INSTRUCTIONS
TOOL TROLLEY
Version 06/13
Item no. 40 53 98
Intended use
This tool trolley enables the organized and neatly arranged storage and transport of tools and accessories
and is ready for use at any time. Since this product is equipped with a pull-out grip and two rollers, it can
be comfortably and easily moved. The tool trolley also offers room for office materials, documents and a
laptop computer.
For safety and approval purposes, you must not rebuild and/or modify this product. If you use the product for
purposes other than those described above, the product may be damaged. Read the instructions carefully
and keep them. Make this product available to third parties only together with its operating instructions.
This product complies with the statutory national and European requirements. All company names and
product names are trademarks of their respective owners. All rights reserved.
Delivery content
• Tool trolley
• Shoulder strap
• Operating instructions
Safety instructions
Read the operating instructions carefully and especially observe the safety information.
If you do not follow the safety instructions and information on proper handling in this
manual, we assume no liability for any resulting personal injury or damage to property.
Such cases will invalidate the warranty/guarantee.
a) Persons / Product
• The device is not a toy. Keep it out of the reach of children and pets.
• Do not leave packaging material lying around carelessly. These may become dangerous
playing material for children.
• Protect the product from extreme temperatures, direct sunlight, strong jolts, high humidity,
moisture, flammable gases, vapours and solvents.
• Do not place the product under any mechanical stress.
• Always pay attention to the maximum load capacity. Overloading can lead to damage to the
product as well as to accidents and injuries.
• Please handle the product carefully. Jolts, impacts or a fall even from a low height can damage
the product.
b) Miscellaneous
• If you have questions which remain unanswered by these operating instructions, contact our
technical support service or other technical personnel.
Equipment
a) Exterior
• Durable polyamide
• The bag can be folded open 180° from both sides
• Ergonomic carrying handle and padded shoulder straps
• Pull-out handle for effortless rolling
• Spacious front pocket for office materials
b) Interior
• Pocket for a laptop computer in the front area
• Card pocket for documents and a Con Pearl tool tray that can be filled from both sides in the rear area
• 3 large versatile and practical pockets in the inside on the back panel
Maintenance and cleaning
• Remove the dust with a dry dust cloth.
• Use a slightly damp cloth in the event of heavy soiling. Then dry off all parts thoroughly.
Disposal
At the end of its service life, dispose of the product according to the relevant statutory regulations.
You thus fulfil your statutory obligations and contribute to the protection of the environment.
Technical data
Fabric material ........................ Polyamide
Load capacity ......................... max. 8 kg
Dimensions (W x H x D) ......... approx. 450 x 380 x 170 mm
Weight .................................... approx. 3.8 kg
These operating instructions are published by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com).
All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfilming, or the capture in electronic data
processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited.
These operating instructions represent the technical status at the time of printing. Changes in technology and equipment reserved.
V1_0613_02-HK
© Copyright 2013 by Conrad Electronic SE.
Version 06/13
V1_0613_02-HK

Werbung

loading

Inhaltszusammenfassung für TOOLCRAFT 40 53 98

  • Seite 1 TOOL TROLLEY Version 06/13 Version 06/13 Best.-Nr. 40 53 98 Item no. 40 53 98 Bestimmungsgemäße Verwendung Intended use Dieser Werkzeugtrolley ermöglicht eine geordnete und übersichtliche Aufbewahrung von Werkzeugen This tool trolley enables the organized and neatly arranged storage and transport of tools and accessories und Zubehör und ist jederzeit einsatzbereit.
  • Seite 2 GEBRUIKSAANWIJZING CHARIOT PORTE-OUTILS GEREEDSCHAPSWAGEN Versie 06/13 Version 06/13 Nº de commande 40 53 98 Bestelnr. 40 53 98 Bedoeld gebruik Utilisation prévue Met deze gereedschapswagen, die op elk moment gebruiksklaar is, kunt u uw gereedschap en toebehoren Ce chariot porte-outils permet un rangement ordonné et bien organisé d‘outils ainsi que d‘accessoires et netjes en geordend opbergen en vervoeren.