Tripod Mount; Maintenance; Cleaning; Storage - Parkside PLLA 12 C3 Originalbetriebsanleitung

Tripod mount

Using the 1/4" inner thread
(5) you can screw the battery-
powered LED work lamp onto
a tripod (not included in this
package).

Maintenance

The battery-powered LED work
lamp is maintenance-free

Cleaning

Switch off the battery-
operated LED light and
remove the battery
from the device before
cleaning.
• Clean the battery-powered
LED work lamp with a soft,
dry cloth to avoid scratching
the cover of the LED lamp.
• Do not use any abrasive
cleaning agents or solvents.
These could damage the
device irreparably.
• Do not use water or metallic
aids. There is a risk of a
short circuit.

Storage

Before prolonged storage,
remove the battery from the
device and charge it fully.
Disposal and
protection of the
environment
Remove the battery from the
device and recycle the device
and packaging in an envi-
ronmentally-friendly manner.
Instruction on how to dispose
of the rechargeable battery
can be found in the separate
instruction manual.
Machines do not belong
with domestic waste.
• Return the unit to a recycling
centre. The plastics and me-
tals in the unit can be sorted
and appropriately recycled.
Ask our Service Centre for
details.
• Dispose of batteries in accor-
dance with the local regulati-
ons. Take batteries to an old
battery collection point where
they will be recycled in an en-
vironmentally friendly manner.
GB IE
23